Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Jose Homeowners Choose Mr-Glass Construction
Bradford Remodeling Co San Jose provides independent Mr Glass repair in San Jose, from roller replacements on EuroLine sliders to full CustomLine frameless panel installs. We’ve worked on Mr-Glass shower enclosures in hundreds of San Jose bathrooms, and our crews know these units by part number, not guesswork. We’re not a Mr-Glass dealer or factory service arm. We’re an independent contractor with deep field time on their 4400, EuroLine, Neo-Angle, and CustomLine lines, and that independence means we recommend repair over replacement only when it actually makes sense. Call (669) 272-2637 for straight answers and a written price before any work starts.
Why Trust Bradford Remodeling Co San Jose for Your Mr-Glass Construction?
Curtis Lane, owner of Bradford Remodeling Co San Jose, learned to read structural drawings and run a job by the numbers at Los Angeles Trade-Technical College. He brought that discipline into every Mr-Glass shower enclosure his crew touches. We don’t guess at glass tolerances or hinge torque. We measure, we document, and we give you a written scope with a fixed price before a tool comes out.
Our technicians have rebuilt Mr-Glass tracks in Willow Glen bathrooms where the original installers never shimmed the curb, and they’ve replaced seized rollers in Cambrian homes where hard water ate the bearings over a decade. That field experience means we know what fails on these units and why. We source OEM rollers, hinges, and sweeps when regional suppliers have them, and we machine-match aftermarket components to original tolerances when a part’s discontinued. Every repair carries our 365-Day Done Right Promise in writing: if our work fails within a year, we come back and fix it at no charge.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in San Jose
Mr-Glass shower enclosures are built well, but San Jose’s specific conditions expose weak points. Here’s what we see most often, and what’s actually causing it:
- Warped or corroded bottom rails on 4400 Series framed units. The 4400 uses aluminum framing that sits directly on the curb or threshold. In older San Jose homes with slab foundations and expansive clay soil, minor slab movement flexes the frame, and trapped moisture from shower overspray accelerates corrosion. A corroded lower rail lets water wick into the wall cavity. We pull the old frame, check the substrate underneath, and either replace the rail assembly or move to a frameless panel if the corrosion has compromised the structural channel.
- EuroLine sliding door rollers grinding or jumping track. The EuroLine rides on small ball-bearing rollers that sit in a bottom track. San Jose’s hard water leaves mineral deposits on the track, and over five to eight years those deposits wear the roller faces. The door starts to grind, then jumps the track entirely. Replacing just the rollers works when the track is still true; if the track’s pitted or bowed, a full panel replacement is the honest call.
- Neo-Angle corner units leaking at the pivot hinge. The Neo-Angle uses vinyl sweeps at the door pivot points, and those vinyl strips harden and shrink after years of soap residue and temperature swings. What looks like a glass problem is almost always a failed sweep or a hinge bushing that’s out of alignment. We replace the sweep or bushing first, then test with a full shower cycle before calling it done.
- CustomLine tempered glass panels stress-cracking. The CustomLine heavy-glass panels are 3/8-inch or 1/2-inch tempered glass, and they crack when the original installer over-torqued the wall channel brackets. The clamp bites too hard, the glass can’t move through thermal expansion, and stress builds until it shatters. We see this in remodels where a prior contractor rushed the install. Our crews set channels to manufacturer torque spec and shim the panel so it floats correctly.
- Hard water etching and pitting across all Mr-Glass lines. San Jose water runs moderately hard, and over years the mineral film etches the glass surface beyond what a squeegee can fix. On coated glass, aggressive acid cleaners strip the protective layer. We’ll tell you honestly whether a deep clean or a panel replacement makes sense. Replacing an etched panel is often cheaper than fighting it every week.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For Mr-Glass enclosures, we source OEM rollers, hinges, and seals from regional suppliers when the parts are still in production. On discontinued 4400 or EuroLine hardware, we machine-match aftermarket components that meet the original tolerances, not whatever’s closest on the shelf. A roller that’s 1/16-inch off will bind within a season, and we’d rather wait two days for the right part than install a bad one today.
Our repair-versus-replace rule is simple: if the frame is structurally sound and the glass is clear, we repair. If a bottom rail is corroded through, or the tempered glass is delaminating or stress-cracked, we recommend full panel replacement. Patching a failed frame just moves the leak to a different corner, and you’ll be back in a year paying for the same fix twice. A new panel costs more now but wins over time. Call (669) 272-2637 and we’ll give you a straight number for either path.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We measure the opening, check the curb and substrate for level, inspect rollers and hinges, and identify exactly which Mr-Glass component failed. You get a written diagnosis with a fixed repair price.
- 2
Repair or install. We pull the failed hardware or panel, prep the curb or wall channels, and set the new Mr-Glass-compatible components to spec. No shortcuts on shimming, torque, or sealant.
- 3
Test. We run a full shower cycle, check every seam and sweep for seepage, and watch the door roll. If it drips, it doesn’t pass. We fix it before we leave.
- 4
Warranty. Every Mr-Glass job gets our written 365-Day Done Right Promise. If the work fails within a year, we return and correct it at no charge. You get that in writing when we close out the job.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in San Jose
Our crews service the full Mr-Glass residential shower line: 4400 Series framed enclosures, EuroLine frameless sliding doors, Neo-Angle corner units, and CustomLine heavy-glass panels. We keep common rollers, sweeps, hinge bushings, and channel brackets stocked in our San Jose service vehicle so most roller and seal replacements happen same-visit. Frameless glass shower enclosures, walk-in shower installations, and shower replacements make up the bulk of our work as a General Contractor. For CustomLine panels, we stock 3/8-inch and 1/2-inch tempered glass in standard widths, which means a cracked panel can often be measured and ordered same week.
We Also Service These Brands
Mr-Glass is a big part of our shower glass work, but we’re multi-brand by design. We also install and service KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures in kitchens and baths across San Jose. That broader range matters because a shower glass job is rarely just a shower glass job; the enclosure has to integrate with the tile, the curb, and the fixture set.
FAQs – Mr-Glass Construction Service in San Jose
Yes, roller-only replacement is possible when the track is straight and the rollers are the only failed component, which costs $470 – $2125 in San Jose. If the track is pitted from hard water or the panel’s out of true, we’ll tell you and quote a full replacement instead. Call (669) 272-2637 and we’ll inspect it free.
Nineteen times out of twenty it’s a seal issue, not glass. The vinyl sweeps at the pivot hinge harden over time, and water gets past them. We replace the sweep and bushing first, test the door through a full cycle, and only touch the glass if it’s actually compromised. Call (669) 272-2637 for an exact diagnosis.
Yes. We service and replace CustomLine panels regardless of who did the original install. If the original installer over-torqued the wall brackets and the glass stress-cracked, we’ll document it, reset the channels to spec, and install a new tempered panel with the proper clearances so it doesn’t crack again.
Yes. A tub-to-shower conversion with a Mr-Glass enclosure runs $4130 – $11800 in San Jose, depending on whether we’re keeping the existing drain location or moving the plumbing, and whether the old tub deck needs re-framing. We can also quote Mr Glass in Palo Alto with a CustomLine frameless panel if you want a cleaner look than a framed 4400 unit. Call (669) 272-2637 for a written line-item quote.
Mildew in the bottom track usually means water isn’t draining properly because the drain holes are clogged with soap scum or the track isn’t level. In San Jose’s hard water, mineral buildup compounds the problem. We clear the weep holes, verify the track slope, and if the aluminum frame’s corroded through we recommend replacing the rail or the whole unit.
Simple roller replacements start around $470; a full frameless enclosure install runs $5310 – $14160, and a complete shower replacement including a Mr-Glass panel is $3540 – $10030. Exact pricing depends on your panel size, glass thickness, and what’s underneath the old unit. Estimates are free, and the price we write is the price you pay. Call (669) 272-2637 for your number.
| Mr-Glass Service | San Jose Price Range |
|---|---|
| Shower door roller replacement | $470 – $2125 |
| Frameless glass shower enclosure installation (Mr-Glass compatible) | $5310 – $14160 |
| Shower replacement including Mr-Glass panel | $3540 – $10030 |
| Tub-to-shower conversion using Mr-Glass enclosure | $4130 – $11800 |
Book Your Mr-Glass Service in San Jose, CA
If your Mr-Glass shower enclosure is leaking, sticking, or stress-cracked, call Bradford Remodeling Co San Jose at (669) 272-2637. We’ll schedule a diagnosis, give you a written price, and stand behind the work for a full year. Straight number, written scope, done when we said done.
Written by Curtis Lane, Owner at Bradford Remodeling Co San Jose, serving San Jose since 2004.
