Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The San Jose Owner’s Guide
Mr-Glass bathroom remodeling in San Jose typically runs $10,620 to $33,040 for a full gut-and-rebuild, with smaller refreshes landing between $5,900 and $14,160. We stock Mr-Glass-compatible glass panels, hinges, and hardware on our trucks, and we can typically get most replacement parts matched and installed the same week. Most San Jose homeowners call us after a glass shower panel starts sagging, a hinge seizes up, or the silicone around a Mr-Glass enclosure turns black and starts letting water through to the subfloor.
We’re Bradford Remodeling Co San Jose, an independent contractor. We install and service Mr-Glass bathroom systems, but we’re not a Mr-Glass dealer or affiliate. What we are is a crew that works off written scope and flat pricing, so when you call about a failed Mr-Glass door or panel, you get a real number before we ever set foot in the house. Curtis Lane runs our San Jose operation, and the first thing he’ll tell you is that Mr-Glass parts fail in predictable ways: hinges wear, glass gets micro-scratched from hard water, and silicone joints break down faster in our dry, hard-water climate than they do almost anywhere else in California.
Which Mr-Glass Models This Applies To
Mr-Glass built its reputation on frameless and semi-frameless shower enclosures, and most of what we replace in San Jose falls into three broad lines: the original frameless pivot-door enclosures, the newer sliding-door systems, and the fixed-panel-plus-door combos that show up in a lot of Willow Glen and Almaden Valley master baths. The compatibility gotcha most owners miss is glass thickness. Older Mr-Glass enclosures used 3/8-inch tempered glass. Newer ones, especially the heavy pivot doors, went to 1/2-inch. A hinge that fits one will not seat properly on the other, and forcing it will crack the glass. Check the corner of the glass panel near the bottom rail: Mr-Glass etches a small code there, usually two letters followed by a number, and that code tells us the glass thickness, the hinge series, and the year it was fabricated.
When we quote a Mr-Glass repair, we give you two options. OEM parts come straight from Mr-Glass’s supply chain and match the original finish exactly, but they cost 30 to 50 percent more and can take two to three weeks to arrive in San Jose. Quality aftermarket equivalents, which we source from the same commercial glass fabricators that serve the Bay Area, usually arrive in three to five days and hit 95 percent of the original fit and finish. For hinges and handles, we generally recommend OEM. For glass panels, aftermarket tempered glass is the smarter money. We’ll lay out both prices in writing and let you pick.
Styles & brands we work with
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- Door sag or drag: The door catches on the threshold or leaves a wider gap at the top than the bottom. This is almost always a worn hinge or a wall-mount pulling loose from the substrate. Left alone, the glass eventually cracks at the hinge point.
- Water on the floor outside the enclosure: Usually a failed silicone joint along the bottom track or the fixed panel. The silicone gets brittle, especially in San Jose’s dry summer air, and water finds the gap. The real damage is what you can’t see: rot starting in the subfloor.
- Black or pink staining along the seams: That’s mold and mildew feeding on trapped moisture. It means the seal has been compromised long enough for water to sit. The fix is more than scraping caulk: we pull the panel, inspect the substrate, dry it out, and re-seat everything.
- Handles or hinges feel loose no matter how much you tighten them: The mounting points have stripped or the backing plate inside the wall has corroded. This is a common failure in older San Jose homes where original galvanized hardware reacts with hard-water minerals.
- Glass has a cloudy film that won’t clean off: Hard water in Santa Clara County etches glass over time. If a razor blade and CLR won’t cut it, the glass surface is permanently pitted. That’s a replacement panel, not a cleaning issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Mr-Glass work actually costs in San Jose, based on what our crews see every week:
- Single hinge or handle replacement: $295 to $825 installed, including the part, silicone work, and a written one-year guarantee.
- Glass panel replacement (3/8-inch or 1/2-inch tempered): $710 to $2,950 depending on panel size, glass thickness, and whether it’s a fixed panel or a door.
- Full enclosure rebuild (new glass, hardware, and seals): $4,130 to $10,030 for most standard Mr-Glass layouts.
- Complete bathroom remodel with Mr-Glass-style enclosure: $10,620 to $33,040 in San Jose, driven mostly by tile work, plumbing rough-in changes, and waterproofing scope.
Every quote includes parts, labor, disposal of the old glass and hardware, silicone and sealant work, and our 365-Day Done Right Promise. If the repair fails within a year, we come back and correct it at no charge. That’s in writing, not in a handshake. The price we give you before work starts is the price you pay when the job is done. No change orders because we found a surprise behind the wall. The written scope covers what we can see, and we price for what we know is there.
DIY or Call Us?
Replacing a Mr-Glass handle or escutcheon plate is something a handy homeowner can do with a screwdriver, some patience, and the right replacement part. We’ll even sell you the part over the counter if you want to handle it yourself. But tempered glass is under internal tension. A panel that’s out of square, dropped wrong, or torqued during install can shatter into a thousand small pieces in a second. Hinges on a 1/2-inch glass door carry at least 80 to 100 pounds of glass. If the hinge fails mid-swing, someone gets hurt. That’s not a scare tactic; that’s why we tell every San Jose homeowner the same thing: if the repair involves moving, lifting, or re-hanging glass, call us. It’s not worth a trip to the ER to save a few hundred dollars.
Call (669) 272-2637 and tell us what Mr-Glass part you’re dealing with. We’ll give you a straight number, put the scope in writing, and get it done when we said we’d get it done.
FAQs
With hard water and dry air working against the seals, most Mr-Glass enclosures in San Jose need new silicone every 3 to 5 years, and new hinges or rollers somewhere in the 7 to 10 year range. The glass itself, if the hinges hold, can last 20 years or more. Call (669) 272-2637 if your enclosure is passing the 10-year mark and showing wear.
No. Tempered glass cannot be repaired. Once it’s cracked, the panel needs to come out and get replaced with new tempered glass cut to the exact same dimensions. We handle the measurement, fabrication order, and install as one job. Call (669) 272-2637 and we’ll get you a written number for the replacement.
A hinge swap takes about an hour on site. A glass panel replacement is usually a half-day job, though the glass itself may take three to five days to fabricate after we measure. Full enclosure rebuilds run one to two days. Call (669) 272-2637 and we’ll give you a schedule that’s written down, not promised over the phone.
We carry common Mr-Glass hinges, handles, rollers, and seals on our trucks. Oddball sizes and custom panels come from our Bay Area fabricators, usually within a week. Either way, we quote you the part price and the labor price separately so you know exactly what you’re paying for. Call (669) 272-2637 and we’ll check stock while you’re on the phone.
Written by Curtis Lane, Owner, Bradford Remodeling Co at Bradford Remodeling Co San Jose, serving San Jose and nearby areas.
