Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Jose Homeowners Choose KraftMaid Construction
Bradford Remodeling Co San Jose provides independent KraftMaid construction, Kraftmaid repair in San Jose, and installation service across San Jose. We work on KraftMaid Vantage, Durham, Benton, and Hadley lines daily, which means we know the failure points those specific door styles and drawer systems develop after years of use. We are not a KraftMaid-authorized dealer, and we do not claim to be. What we bring instead is field experience from hundreds of teardowns in San Jose kitchens, which tells us exactly what fails, why it fails, and the cheapest honest fix. Call (669) 272-2637 to have a real person schedule your estimate.
San Jose homes run heavy on 1950s-to-1970s ranch and Eichler-era construction. That stock creates a specific pattern: original cabinetry torn out during remodels gets replaced with KraftMaid, then fifteen or twenty years later those same cabinets need doors, glides, or structural repair. We handle that full arc, from first install to mid-life fix.
Why Trust Bradford Remodeling Co San Jose for Your KraftMaid Construction?
KraftMaid cabinetry uses specific bore patterns, hinge mounts, and drawer glide tolerances. A tech who has only hung generic boxes will misread those tolerances and start re-drilling. Our crews have pulled apart enough Vantage base cabinets to know, for example, that the 2010-2015 soft-close glides collect silicon lubricant and seize, which causes the drawer to bounce back instead of closing. That is a cleaning-and-replacement fix, not a new cabinet. Knowing the difference saves San Jose homeowners real money.
Curtis Lane, a licensed General Contractor, runs Bradford Remodeling Co San Jose. He trained through the construction technology program at Los Angeles Trade-Technical College, where reading structural drawings and running work by the numbers was the entire curriculum. He has applied that same discipline to KraftMaid work for years now: diagnose from the mount points outward, quote a written price before any work starts, and stand behind the result for a full year under the 365-Day Done Right Promise.
We carry Blum Tandem glides and Salice hinges on the truck because those drop into existing KraftMaid bore patterns without re-drilling. We order visible fronts direct through distributors for exact color match. This is the difference between a patch job and a repair that holds.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in San Jose
- Vantage soft-close drawer bounce-back (2010-2015 bases). The original glide channels collect a silicon-based lubricant that dries into a gummy film. Drawers start bouncing open instead of seating. We see this constantly in San Jose peninsula remodels where the original KraftMaid install is a decade old. The fix is a glide swap with current Blum Tandem hardware, which seats into the same mount points.
- Durham white shaker thermofoil delamination at the bottom rail. Dishwasher steam vents upward, and on Durham doors the thermofoil lifts at the bottom edge first. Once the film peels more than about 25% of the rail, we replace the door rather than refinish. A refinished thermofoil panel fails again inside two years. This is a known KraftMaid-specific pattern, and we diagnose it quickly.
- Benton island end panel swelling at the toe-kick. Mopping pushes water against the toe-kick, and on Benton islands the end panel wicks it upward into the substrate. The finish splits. We remove the panel, cut back the swollen material, seal the exposed edge, and install a new panel with a moisture barrier at the base.
- Adjustable shelf clip shear in older pantry cabinets. KraftMaid pantry cabinets from the early 2000s used plastic shelf clips rated for lighter loads than what a loaded pantry actually holds. In San Jose’s Eichler-era kitchens, where storage space is tight, those pantries run heavy. When clips shear, a loaded shelf comes down on the dishes below. We replace with heavy-duty metal clips rated at 75 pounds and re-square the side panels if they have bowed.
- Hadley door hinge sag on wide upper doors. Hadley upper cabinets run wider than most lines, and the original hinges carry more torque. After years of cycles, the hinge plates loosen in the bore. We reset the hinges, shim where needed, and replace with Salice hardware that matches the existing mount pattern.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis at the cabinet, not from a photo. We walk the job and pull the failing hardware to see why it actually failed. A sagging drawer can be a bad glide, a warped side panel, or loose mount screws. Each has a different fix and a different price. We figure that out before we quote.
- 2
Written price before work starts. The Garrison Standard requires this. You get a line-item price for the exact KraftMaid-specific repair or install we are doing. No numbers that move at the door.
- 3
Repair or install with matched components. For internal hardware we use Blum and Salice parts that drop into existing bore patterns. For visible fronts we source KraftMaid direct through distributor channels to match the exact color and door style.
- 4
Test cycles before we call it done. Every drawer cycles ten times. Every door opens, closes, and aligns. Every install gets checked for square and level before we wipe the site down.
- 5
Signed written guarantee in your hand. Every KraftMaid repair and install carries the 365-Day Done Right Promise. If the work fails inside a year, we come back and correct it at no charge. That guarantee is in writing, signed, before we leave the job.
KraftMaid Parts & Our Repair-vs-Replace Approach
Here is the straightforward breakdown. Visible fronts: we source KraftMaid direct through distributor channels because color match on Vantage maple cinnamon or Durham white shaker is a factory tolerance issue, not a guess. Internal hardware: we use Blum Tandem glides and Salice hinges because they drop into existing KraftMaid bore patterns without re-drilling, and they are the hardware KraftMaid itself has specified on newer lines. We do not re-drill cabinets unless there is no alternative.
Repair versus replace comes down to thresholds, not vibes. A thermofoil door with delamination under 25% of the rail can be stabilized. Over 25%, we replace because the refinished panel will fail again within two years, and you will pay twice. A cracked face frame on a Vantage base gets repaired with a color-matched patch if the cabinet is structurally sound. If the box is compromised, we tell you straight: replace the cabinet, not the hardware. Call (669) 272-2637 and we will give you an honest read on your specific cabinets.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in San Jose
We service and install the KraftMaid Vantage, Durham, Benton, and Hadley lines, including base cabinets, wall cabinets, pantry cabinets, and kitchen islands across San Jose and nearby areas like Kraftmaid in Sunnyvale. We stock Blum Tandem glides, Salice hinges, heavy-duty shelf clips, and standard mounting hardware locally, which keeps most repairs to a single visit. For matching doors and panels, we order KraftMaid direct through distributor channels, and we give you the lead time on the written quote so there is no phone call later explaining a delay. We also install new KraftMaid cabinetry for small and partial kitchen remodels, including peninsula layouts common in San Jose ranch homes.
We Also Service These Brands
Our crew works across multiple brand lines. Beyond KraftMaid, we service and install Cambria and Silestone countertops, Kohler and Toto fixtures, and other documented brands. You are never locked into a single brand with us. If your kitchen has KraftMaid cabinets and a Silestone top, we handle both in one visit and one written quote.
FAQs – KraftMaid Construction Service in San Jose
Yes, in most cases we can. We order a single Vantage maple cinnamon door or panel through distributor channels and match the existing finish as closely as factory tolerances allow. On older cabinets, the original finish will have aged, so there may be a slight difference that settles over time. We show you the sample before we order, and we never charge you for a match you have not approved. Call (669) 272-2637 for a specific assessment of your cabinets.
Dishwasher steam is the cause. Durham shaker doors use a thermofoil wrap, and repeated steam exposure lifts the film at the bottom rail first. Once the peel reaches about 25% of the rail, the door should be replaced, not refinished. We replace the door with a KraftMaid-matched unit and add a steam deflector if the dishwasher is tight against the cabinet run.
Yes, we do. KraftMaid island cabinets are built to standard cabinet load ratings, and a quartz top adds significant weight. We add corner bracing and a center support cleat before setting the stone. This is standard on our island installs in San Jose and Kraftmaid in Palo Alto, especially on peninsula islands where the overhang carries breakfast seating.
Yes. We router new clip slots into the existing side panels to accept heavy-duty metal clips rated at 75 pounds, then install roll-out trays sized to the existing opening. The cabinet stays in place. This is exactly what we did in a Berryessa split-level where a Durham pantry had collapsed two shelves from failed original clips. No new cabinet from Ohio was needed.
It depends on what failed. If the cabinet boxes are square and the existing doors are structurally sound, replacing hardware and refinishing runs from $5,900 to $14,160 in San Jose. If the doors themselves are delaminated or cracked, replacing them with KraftMaid-matched doors is usually the cheaper long-term fix, because a refinished thermofoil panel fails again within two years. We give you both numbers on the written quote and recommend the one that actually holds.
How much does KraftMaid construction cost in San Jose?
| Service | Price Range |
|---|---|
| Cabinet Installation (per linear foot) | $4,720 – $15,340 |
| Kitchen Island Installation (prefab KraftMaid island) | $3,540 – $11,800 |
| Cabinet Refacing (doors, veneer, hardware labor only) | $5,900 – $14,160 |
| Backsplash Installation behind KraftMaid cabinets | $945 – $2,950 |
Every quote is written and line-itemed before work starts. Call (669) 272-2637 for an exact number on your KraftMaid repair or install.
Book Your KraftMaid Service in San Jose, CA
Straight number, written scope, done when we said done. Call (669) 272-2637 to schedule your KraftMaid repair, reface, or install in San Jose. A live person answers, and your free estimate is written, not verbal.
Written by Curtis Lane, Owner at Bradford Remodeling Co San Jose, serving San Jose since 2004.
