Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The San Jose Owner’s Guide
A KraftMaid bathroom remodel in San Jose typically runs $10,620 to $33,040 installed, depending on vanity size, countertop material, and whether plumbing rough-ins need to move. We stock KraftMaid cabinet lines and the matching hardware, hinges, and drawer glides on our trucks, and we can usually have the vanity section of a remodel roughed in within one working day once the cabinets are on site. Most San Jose homeowners discover they need us when a drawer front has pulled loose from its glide, a hinge has stripped out of the cabinet face, or water has swollen the substrate under a sink base.
Here’s what you need to know before you buy a single replacement part: KraftMaid cabinetry spans several construction lines, and the hardware from one line does not always fit another. That compatibility gap is where most DIY repairs go sideways. We’ll walk through it below.
Which KraftMaid Models This Applies To
KraftMaid builds cabinets across three main lines: the entry-level Venicia series, the mid-range standard line sold through big-box retailers, and the semi-custom line available through independent kitchen and bath dealers. The difference matters because hinge boring patterns, drawer box depths, and even the finish chemistry vary between them. The Venicia line uses a European-style cup hinge with a 35mm bore. The semi-custom line often ships with a heavier concealed hinge and a soft-close mechanism that mounts differently. If you pull a hinge off a Venicia door and try to swap in one from the semi-custom line without checking the bore pattern, the door sits proud of the frame and never closes flush.
Here’s the practical way to identify what you have: open a door and look at the hinge cup. Venicia hinges are stamped with a small “V” or “V1” marking on the hinge arm. Semi-custom hinges usually carry a Blum or Salice manufacturer mark. The drawer glide is the other tell. Venicia drawers ride on a white epoxy-coated side-mount glide. The semi-custom and standard lines use a full-extension undermount glide with a locking clip at the front. If you call us, we’ll ask you to read those markings before we pull parts. It saves you money and saves our crew a second trip.
One more thing worth knowing: KraftMaid uses a catalyzed conversion varnish on their finished doors and drawer fronts. That finish holds up well in the Bay Area’s mild climate, but bathrooms in older San Jose neighborhoods with no exhaust fan see moisture cycles that eventually lift the varnish at the sink base edges. We see it regularly in Willow Glen ranchers and Craftsman-era homes downtown. Touch-up kits exist, but once the varnish has lifted more than a few inches, repainting a single door rarely matches the aged finish on the rest of the vanity.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer front sags or sits crooked. The undermount glide has lost its locking clip, or the drawer box staple has pulled through the melamine. It’s a five-minute fix with the right clip, but the wrong clip will split the drawer side.
- Door won’t stay closed or closes with a hard stop. The hinge has stripped its screws from the cabinet face, or the soft-close piston has seized. A stripped screw hole in a KraftMaid face frame sometimes needs a threaded insert, not just a thicker screw.
- Sink base floor is soft or discolored. Water has gotten past the sink seal and into the particleboard substrate. In San Jose’s hard water, mineral buildup at the faucet base is a common early warning sign that the seal is failing.
- Finish is peeling or bubbling at the bottom rail. Steam from showers condenses on the door face and works its way under the conversion varnish. Once moisture finds a path, the peeling spreads. The fix is a reface or replace, not a touch-up.
- Toe kick has swollen or split. The toe kick is the first piece to take on floor-level water. KraftMaid toe kicks are typically a separate snap-in piece, so this is one of the less expensive repairs, unless the water has traveled up into the cabinet box.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A KraftMaid-oriented bathroom remodel in San Jose falls between $10,620 and $33,040 installed. The spread is driven by vanity size, whether you’re replacing a single cabinet line or running new cabinetry across a double vanity, countertop material (solid surface and quartz run higher than cultured marble), and whether the plumbing rough-in needs to move. Moving a drain or supply line in an older San Jose home adds real money: you’re cutting into subfloor and running new waste pipe, not just swapping a faucet.
Every estimate we write is a flat number on paper before work starts. That price includes demolition of the old vanity and any failed parts, new KraftMaid cabinet installation, countertop fitment, plumbing hookups, and haul-away. It also includes our 365-Day Done Right Promise: if any part of the install fails within a year, we return and correct it at no charge. No change orders at the door, no verbal scope. Curtis Lane’s rule is the same on every job: “Straight number, written scope, done when we said done.”
DIY or Call Us?
You can safely check a few things yourself before spending money. Confirm the hinge cup marking (Blum, Salice, or the Venicia “V”). Measure the drawer box depth from front to back. Check whether the cabinet face frame is solid wood or the laminate over MDF used in the Venicia line. Those three details tell you whether the part you found online will actually fit. What you should not do is try to pull a sink base cabinet out yourself if any drain pipe runs through it. San Jose plumbing systems in older homes often have galvanized drain lines that are holding together by corrosion. Once you disturb them, you own the leak.
Bathroom cabinet work is low-voltage and low-risk from a safety standpoint. The risk is to the job itself: a mismatched hinge bores a hole you can’t un-bore, and a stripped drawer glide clip cracks a drawer side you’ll have to replace. If you’re not sure, call (669) 272-2637 and describe the part. We’ll tell you over the phone whether it’s worth a service call.
FAQs
A properly installed KraftMaid vanity typically lasts 15 to 25 years in the Bay Area climate, with the finish holding longest in bathrooms with working exhaust fans. Moisture is the killer, not age. If your bathroom has no vent fan, expect finish wear and substrate swelling much sooner.
Yes. Hinges, glides, clips, and drawer fronts are all repairable or replaceable without pulling the whole vanity. Damage to the cabinet box itself from water means replacement. We’ll tell you which one you have after a five-minute look.
A single vanity swap is typically a one-day job.
We stock common KraftMaid hinges, glide clips, and mounting hardware for the Venicia and semi-custom lines. Complete cabinetry is ordered to spec.
If you’ve got a KraftMaid vanity that’s showing its age or a drawer front that’s finally given up, call (669) 272-2637 for a written estimate. We’ll give you the straight number before we touch a tool.
Written by Curtis Lane, Owner, Bradford Remodeling Co at Bradford Remodeling Co San Jose, serving San Jose and nearby areas.
