Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Jose Homeowners Choose Jerith Construction
Bradford Remodeling Co San Jose provides independent Jerith fence construction, Jerith repair in San Jose, and service across the area, working on the aluminum and steel fence systems Jerith has manufactured for decades. We are not a Jerith authorized dealer or installer, and we don’t pretend to be. What we are is a local crew that has pulled apart enough Jerith gates, posts, and hinge assemblies in San Jose yards to know exactly which components hold up and which ones fail first. If you need a Jerith fence repaired, a sagging pool gate re-hung, or a new run of Jerith aluminum fencing installed, call us at (669) 272-2637 for a written price before any work starts.
Our crews work on Jerith systems across San Jose’s varied microclimates, from Jerith in Sunnyvale and coastal-influenced dampness on the west side to dry valley heat in the east foothills. That matters because the failure modes are not the same everywhere. A dark bronze powder coat that chalks after six years of full sun in Almaden behaves differently than the same finish near the fog line. We know the difference because we’ve worked both.
Why Trust Bradford Remodeling Co San Jose for Your Jerith Construction?
Curtis Lane, our owner, built Bradford Remodeling on a simple rule: straight number, written scope, done when we said done. He trained through the construction technology program at Los Angeles Trade-Technical College, where he learned to read structural drawings and run a job by the numbers, not by feel. That approach carries into every Jerith fence we touch in San Jose.
Our technicians work on Jerith’s residential aluminum fence lines, including spear-top and flat-top styles, plus the heavier ornamental steel fence and the pool-safe aluminum systems with self-latching gate hardware. We source genuine Jerith replacement components when they’re available, hinge sets, latch assemblies, post caps, and striker plates. When a cosmetic fix calls for a finish match, we use a high-grade polyester powder coat blended to the original color. Every Jerith job gets the same treatment as our remodeling work: a written price before the first tool comes out, and the 365-Day Done Right Promise in writing when the job closes. If the repair fails inside a year, we come back and correct it at no charge. That’s The Garrison Standard, and it applies to a fence post just like it applies to a kitchen.
Styles & brands we work with
Common Jerith Construction Problems We Fix in San Jose
These are the Jerith-specific failures we see most often in San Jose, and they’re rarely the fault of the fence. They’re the result of sun, soil, and time.
- Sagging pool gates on Jerith Pool-Safe Aluminum Fence systems. The original hinge bushings wear into an oval after years of repeated opening and closing, especially on heavy self-latching pool gates. The latch then misses the striker plate by a quarter inch, and the gate won’t close without a shoulder slam. The fix is a new Jerith hinge kit, re-shimmed hinge posts, and spring tension adjusted so the gate closes with one finger. In Willow Glen, we replaced exactly this on a pool gate the homeowner had been told needed full replacement. A $200 parts-and-labor fix kept the original panel in service.
- Powder coat chalking and fading on dark bronze finishes. After five to seven years of full San Jose sun, dark bronze Jerith aluminum begins to chalk. The surface gets a white, powdery film and the color loses its depth. This is cosmetic, not structural. We clean the affected sections and apply a matched polyester powder coat so the repair doesn’t look like a patch.
- Loose or stripped post caps allowing water intrusion. Post caps on Jerith aluminum and steel fence posts work loose over time, especially where wind and sprinkler spray hit them. Water gets inside the post, sits in the bottom, and starts internal corrosion at the post top. We replace the caps with genuine Jerith components and seal them properly so the post drains instead of holding water.
- Leaning posts from concrete footing cracks. San Jose has expansive clay soils in plenty of neighborhoods, and when the clay swells after winter rains and shrinks in summer, the concrete footing around a Jerith post can crack. The post starts to lean, and the fence line develops a visible wave. We reset the post in a properly sized concrete footing, often deeper than the original, and re-level the adjacent sections.
- Stripped or seized gate latch assemblies on heavy steel gates. Jerith ornamental steel gates are heavy, and the latch takes abuse. After years of use, the internal springs weaken and the latch mechanism seizes or strips. Replacement with a genuine Jerith latch assembly restores the self-latching function, which matters on any pool fence where code requires it.
Jerith Parts & Our Repair-vs-Replace Approach
We use genuine Jerith replacement components whenever they’re available, hinge sets, latch assemblies, post caps, and striker plates. Those parts are engineered to fit the original extrusion profiles, so a repaired section meets the rest of the fence cleanly. For cosmetic work, we may match the original finish with a high-grade polyester powder coat instead of painting, because paint peels off aluminum in a season and powder coat bonds.
Some things are worth replacing rather than patching. If a Jerith aluminum post is severely corroded internally, or a steel gate frame is bent, we recommend replacing that section. Jerith’s modular design makes targeted replacement cost-effective, and a new section preserves the fence’s structural integrity better than a welded patch ever will. We stock common Jerith components locally in San Jose for faster turnaround on repairs, and anything we don’t have on the shelf we order directly. Call (669) 272-2637 if you’re deciding between a repair and a replacement, and we’ll give you an honest read.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We come out, inspect the fence, and identify the exact failure. Is the hinge bushing worn or the post footing cracked? Is the latch spring dead or the striker misaligned? We write down what we find in plain terms, so you know what you’re paying for before you pay it.
- 2
Repair or install. We remove the failed Jerith component and install the replacement, whether that’s a hinge kit, a post cap, a powder coat touch-up, or a full section. Existing sections are matched so the repair disappears into the fence line.
- 3
Test. Gates get cycled through their full range, latches are checked for proper strike, posts are checked for plumb, and self-closing springs are tensioned until the gate closes firmly from any angle. On pool fences, we verify the self-latching function meets San Jose code requirements.
- 4
Warranty. You get the written 365-Day Done Right Promise before we leave. If anything we touched fails inside a year, we return and correct it at no charge. That’s the guarantee, in writing, every time.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in San Jose
We work on the full range of Jerith fencing systems throughout San Jose and Jerith in Palo Alto: the Residential Aluminum Fence in spear-top and flat-top styles, the Industrial Aluminum Fence for tougher commercial-grade runs, the Ornamental Steel Fence for higher security and heavier frame profiles, and the Pool-Safe Aluminum Fence with self-latching gate systems. We install new runs, extend existing fences, replace sections damaged by storms or vehicles, and repair the hardware that keeps gates working. We stock common Jerith hinge sets, latch assemblies, and post caps locally in San Jose, which means most repairs don’t wait on a parts shipment.
We Also Service These Brands
Jerith is not the only system we work on. Our crews install and service KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, and we bring the same written-price, written-guarantee approach to all of it as your General Contractor. If your project spans a Jerith fence and a kitchen remodel, one call to (669) 272-2637 starts both conversations.
FAQs – Jerith Construction Service in San Jose
Is Bradford Remodeling Co San Jose authorized by Jerith?
No. We are an independent Jerith service provider in San Jose, not an authorized dealer or warranty station. That means we’re free to tell you when a repair makes more sense than a replacement, and we don’t have a manufacturer quota to hit. We source genuine Jerith parts where they matter, and we stand behind our own work with the 365-Day Done Right Promise.
Do you use genuine Jerith or OEM parts?
We use genuine Jerith replacement components, hinge sets, latch assemblies, post caps, and striker plates, whenever they’re available. For cosmetic finish work, we match the original with a high-grade polyester powder coat rather than a paint job. If a part is backordered, we tell you before we order it.
How long does Jerith service take?
Most Jerith gate repairs and section replacements in San Jose are done in a single visit, typically two to four hours depending on the scope. New fence installation runs longer, and we’ll give you a written timeline with your written price before the job starts. Call (669) 272-2637 and we’ll tell you what to expect for your specific repair.
What Jerith models or series do you cover?
We service and install Jerith Residential Aluminum Fence in spear-top and flat-top configurations, Jerith Industrial Aluminum Fence, Jerith Ornamental Steel Fence, and Jerith Pool-Safe Aluminum Fence with self-latching gate systems. If you have a Jerith fence that doesn’t fall neatly into a series, bring us a photo and we’ll identify it.
Will service void my Jerith warranty?
Work by an independent contractor may affect any remaining manufacturer warranty, depending on the terms Jerith set when the fence was purchased. We won’t guess at that. We’ll tell you what we’re doing, what parts we’re using, and you can check your original warranty before we touch the fence. Our own 365-Day Done Right Promise covers our work regardless.
How much does Jerith construction cost in San Jose?
Aluminum fence installation in San Jose runs $4,720 to $11,800 depending on linear footage, gate hardware, and site prep. Vinyl fence installation runs $4,130 to $10,620. Emergency and storm damage fence repair runs $470 to $2,125. These are market-calibrated ranges for San Jose, and you’ll get a written line-item price from us before any work starts. Call (669) 272-2637 for an exact quote, free of charge.
| Service | San Jose Price Range |
|---|---|
| Aluminum Fence Installation | $4,720 – $11,800 |
| Vinyl Fence Installation | $4,130 – $10,620 |
| Emergency & Storm Damage (fence repair) | $470 – $2,125 |
In most cases, yes. We blend a high-grade polyester powder coat to match the existing finish, accounting for the fading the original has already undergone. A brand-new panel matched to the original factory color will stand out against six years of San Jose sun. We match to the current appearance of your fence, not the factory swatch, so the repair reads as continuous. Call (669) 272-2637 and we’ll take a finish sample from your fence.
Usually the hinge bushings are the problem before the spring ever fails. On heavy Jerith pool-safe aluminum gates, the bushings wear into an oval shape, the gate drops, and the latch misses the striker plate. The spring’s tension gets blamed, but the real fix is a new Jerith hinge kit, re-shimmed hinge posts, and a proper tension adjustment. We diagnose this exact issue regularly in San Jose, including one Willow Glen pool gate we fixed for about $200 when the owner had been quoted a full replacement. Call (669) 272-2637 for an exact diagnosis.
Yes. A leaning Jerith post in San Jose is usually a footing problem, not a post problem. Clay soil swells after winter rain and shrinks in summer, and the concrete footing cracks. We dig out the failed footing, reset the post plumb in a new concrete footing, often deeper than the original, and re-level the adjacent sections. The post itself usually doesn’t need replacement unless internal corrosion has taken hold.
It holds up well overall. Aluminum doesn’t rust, and San Jose’s mild climate is easier on fences than coastal salt air or desert heat. The weak points are dark powder coat finishes under five-plus years of full sun, which chalk and fade, and concrete footings in expansive clay soil, which crack and cause post lean. Both are repairable, and we address them without replacing the entire fence.
Yes. Jerith’s modular design means individual pickets and rails can be replaced without tearing out whole sections. We match the replacement pickets to the existing profile and finish, so the repair doesn’t read as a patch. If the damage is confined to a few pickets and the rails are sound, targeted replacement is the honest fix. Call (669) 272-2637 for a written quote on the specific damage.
Book Your Jerith Service in San Jose, CA
If your Jerith fence needs repair, a gate needs re-hanging, or you’re pricing a new fence in San Jose, call Bradford Remodeling Co San Jose at (669) 272-2637. You’ll get a written price before any work starts, and the 365-Day Done Right Promise when the job closes. Straight number, written scope, done when we said done.
Written by Curtis Lane, Owner at Bradford Remodeling Co San Jose, serving San Jose since 2004.
