A Bradford company - serving San Jose, CA
An open living room and dining area after a whole-home remodel

CWS Construction Service Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Jose
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Why San Jose Homeowners Choose CWS Construction

CWS repair in San Jose for cabinets and countertops runs $4,720 to $15,340 for full cabinet installation, and most hinge, glide, or finish repairs are done in one visit. Bradford Remodeling Co San Jose is an independent CWS service provider, not a manufacturer-authorized shop, which means we diagnose what’s actually wrong with your cabinets and tell you straight whether repair or replacement makes sense. Curtis Lane and our crews have worked on CWS Newport, Solstice, Harbor, and Cosmopolitan cabinetry in homes across Willow Glen, Cambrian, and the broader Santa Clara County, so we know these boxes, their hinges, and where they fail. If your CWS cabinet doors are rubbing, thermofoil is peeling, or drawers stick, call (669) 272-2637 and we’ll give you a written price before any work starts.

Call (669) 272-2637

What you get with us is simple: a straight number, written scope, done when we said done. That’s the rule Curtis built this company on, and it’s how every CWS job runs.

Why Trust Bradford Remodeling Co San Jose for Your CWS Construction?

A remodeled living room with built-in shelves around the fireplace

We’re not a CWS dealer and we don’t pretend to be. We’re an independent San Jose remodeling contractor that has installed and repaired enough CWS cabinetry to know the hinge geometry, the finish weaknesses, and the moisture fail points specific to each series. The Newport inset line, for example, runs on soft-close hinges that are hinge-adjustable but prone to sag when the cabinet framing settles. Our techs know how to read a 1/8-inch reveal and correct it. That’s the difference between a crew that has done this exact job dozens of times and one that’s guessing from a YouTube video.

Curtis Lane came up through the construction technology program at Los Angeles Trade-Technical College, where he learned to read structural drawings and run jobs by the numbers. That discipline carries through every CWS service call: we measure, we diagnose, we quote a number, and we write it down. When our crew works on CWS cabinets in a San Jose kitchen, they bring manufacturer-spec hinges and glides when available, and they explain the repair in plain terms before touching a screwdriver.

Every CWS job we complete carries the 365-Day Done Right Promise. If the hinge sags again or the glide sticks inside a year, we come back and fix it at no charge. Written, signed, dated.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common CWS Construction Problems We Fix in San Jose

  • Soft-close hinge sag on Newport inset doors. After three to five years of daily use, the original hinges on CWS Newport inset doors lose their tension and the door drops a fraction. You’ll notice uneven reveals or rubbing at the top rail. The cause is usually hinge wear combined with minor cabinet frame settling. We recalibrate with new CWS soft-close hinges and reset the door alignment to an even reveal, typically without replacing any door.
  • Thermofoil peeling on Solstice drawer fronts and door edges. The CWS Solstice Full Overlay Series has thermofoil-wrapped doors. When a dishwasher vents steam directly against the adjacent cabinet, the heat and moisture break down the adhesive bond, and the film lifts. This is a finish failure, not a structural one. We strip and reface the affected doors with matched thermofoil or upgrade to painted wood fronts when the homeowner wants a more durable surface.
  • Delamination of Harbor series cabinet sides. CWS Harbor Ready-to-Assemble cabinets use particleboard cores. If an under-sink leak goes unnoticed or a bathroom vanity sits against a humid wall, the particleboard swells and the laminate separates. That’s a substrate failure. We repair the box when the damage is localized, but when the side panel is compromised, replacing the cabinet is the honest call. Patching delaminated particleboard just hides the problem.
  • Drawer glide roller wear on Cosmopolitan frameless cabinets. CWS Cosmopolitan frameless cabinets carry full-extension glides with nylon rollers. Heavy pot-and-pan drawers put years of load on those rollers, and eventually they flatten or crack. You’ll feel sticking, hear grinding, or see the drawer cock sideways. We replace the glides with CWS-spec parts or quality equivalents and correct the drawer box alignment so it closes square.
  • Misaligned doors after San Jose soil movement. San Jose sits on pockets of expansive clay soil, and older homes shift. When a house settles, wall cabinets move with it, and CWS inset or full-overlay doors can drift out of alignment. Our crews have realigned CWS doors on homes across Willow Glen after seasonal movement threw off reveals. We correct the hinge geometry first; if the cabinet box itself has racked, we’ll tell you and quote the fix.

CWS Parts & Our Repair-vs-Replace Approach

A whole-home remodel with the living, dining and kitchen areas opened up

When a CWS cabinet part fails, we install genuine CWS hinges, glides, and touch-up kits whenever those parts are available. Genuine parts preserve the original fit, the original finish, and the manufacturer’s warranty position. For discontinued CWS components, we source quality aftermarket equivalents from established millwork suppliers in the Bay Area, not the cheapest imports we can find online. The fit and finish have to match.

The repair-versus-replace call comes down to the cabinet box. Hinges, glides, door fronts, and drawer boxes are all replaceable parts. If the cabinet side has delaminated from water, the box is compromised and no hinge swap will fix it. That’s when we recommend replacement. We don’t sell you a full kitchen when three drawers need new glides. We’ve done too many jobs where a homeowner was quoted a full reface for what turned out to be six bad hinges. Call (669) 272-2637 and we’ll give you a written price for the actual repair.

Our CWS Service Process – Step by Step

  1. 1
    Diagnosis. We inspect every CWS door, hinge, glide, and cabinet box in the affected run. We measure reveals, open and close each door under load, and check for moisture damage at the sink base, dishwasher return, and bathroom vanity. You get a plain explanation of what we found and what it means.
  2. 2
    Written quote. Before any work starts, we give you a line-item written price. That price covers the parts, the labor, and the timeline. It does not move at the door. If we find something else while working, we stop, show you, and get agreement on the added scope before proceeding.
  3. 3
    Repair or install. We replace hinges and glides with CWS-spec parts, reface doors, or install new CWS cabinetry per your written scope. We protect the surrounding floor and counters, and we clean as we go. Uniformed, background-checked techs, every time.
  4. 4
    Test and verify. Every door opens and closes without rubbing. Every drawer pulls full extension and returns square. Reveals are even and consistent. We run the full cycle on every hinge and glide before we call the job done.
  5. 5
    Warranty in hand. You get a signed 365-Day Done Right Promise for the work we completed. If anything fails inside the year, we return and correct it at no charge. Site is clean, scope is documented, warranty is signed.

CWS Products We Service & Install in San Jose

We service and install the CWS cabinetry lines most common in San Jose homes. The Newport Inset Cabinet Series, with its 1/8-inch reveals and soft-close hinges, is the one we see most in higher-end remodels. The Solstice Full Overlay Series covers mid-range kitchens where thermofoil or painted finishes are standard. The Harbor Ready-to-Assemble Series shows up in garage conversions, laundry rooms, and budget-conscious remodels. The Cosmopolitan Frameless Series is popular in modern ADUs and condo makeovers. On service calls, our trucks carry common CWS hinge and glide sets, touch-up kits, and drawer box components. When a part isn’t on the truck, we source it from local millwork suppliers, usually within two business days.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

We Also Service These Brands

Bradford Remodeling Co San Jose offers General Contractor services and is not a single-brand shop. Alongside CWS, our crews install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. We carry the same written-price standard and the same one-year guarantee across every brand. The brand on the box matters less than how the job is specified and executed.

FAQs – CWS Construction Service in San Jose

A remodeled family room with new windows and a window seat

Can you fix soft-close hinges on my CWS Newport inset cabinets without replacing the doors?
Yes. Soft-close hinge sag on Newport inset doors is almost always a hinge issue, not a door issue. We replace the worn hinges with genuine CWS parts, recalibrate the adjustment screws, and reset the door to an even 1/8-inch reveal. You don’t need new doors for this repair. Call (669) 272-2637 for a written quote.

My CWS Solstice thermofoil doors are peeling near the dishwasher. Is refacing worth it?
When thermofoil peeling is limited to the dishwasher return or a few adjacent doors, refacing is worth it. We strip the failing film and apply matched thermofoil or upgrade you to painted wood fronts, which handle steam far better in the long run. If peeling appears on most doors, a broader reface starts making more sense than patching piecemeal. We’ll give you a straight number for either path.

How do you match CWS Harbor cabinet finish when adding a new island or pantry?
We spec the new boxes in the same CWS Harbor finish code as your existing cabinets and order the material through our local millwork suppliers. For stain-grade finishes, we do a visual match under your kitchen lighting and confirm the sheen before install. If you’re adding an island to an older kitchen, expect a slight variation because the original finish has aged, but we get it close enough that the seam reads as intentional. Call (669) 272-2637 and we’ll walk you through the finish options.

Do you repair CWS drawer glide failures on Cosmopolitan frameless cabinets, or just replace them?
We repair them. Drawer glide roller wear on Cosmopolitan frameless cabinets is a mechanical failure in the glide, not the cabinet box. We swap the worn glides for CWS-spec replacements, check the drawer box for square, and test the drawer under full load before we leave. Replacements out of pocket are usually under $300 per drawer bay, parts and labor. Full cabinet replacement is almost never needed for a glide issue.

Can you make a CWS kitchen island larger by integrating additional cabinets, and what does it cost in San Jose?
Yes, we can. Expanding a CWS kitchen island by integrating additional cabinets typically runs $3,540 to $11,800 in San Jose, depending on the cabinet series, countertop overhang, and whether the island has electrical or plumbing to relocate. We match the new boxes to your existing CWS series and finish, then reinstall the countertop or spec a new surface to fit the larger footprint. Call (669) 272-2637 for a line-item quote on your specific island.

Is Bradford Remodeling Co San Jose authorized by CWS?
No, we are an independent CWS service provider. Bradford Remodeling Co San Jose is not affiliated with or authorized by CWS. We service and install CWS products alongside several other cabinet brands, and our one-year written guarantee applies to the work we perform, not the manufacturer’s warranty. What you get from us is local, independent, and by the book.

CWS Service Pricing in San Jose

Service Price Range
Cabinet Installation $4,720 – $15,340
Kitchen Island Installation $3,540 – $11,800
Walk-In Shower Installation $5,310 – $14,160

These ranges reflect what we see across San Jose CWS jobs: the low end covers a simple cabinet run or small island build, the high end covers larger kitchens, custom island configurations, or shower work that requires moving plumbing and waterproofing a new substrate. Every quote is written, line-itemed, and fixed before work begins. No numbers that move at the door.

Book Your CWS Service in San Jose, CA

If your CWS cabinets are sagging, peeling, sticking, or you’re planning a new install, call (669) 272-2637. We’ll schedule a time that works, show up ready to diagnose, and hand you a written price before anything comes off the hinges. Straight number, written scope, done when we said done.

Written by Curtis Lane, Owner at Bradford Remodeling Co San Jose, serving San Jose since 2004.

Getting started with Bradford in San Jose

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your San Jose team

A local crew that works across San Jose and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Jose? Licensed & insured · Free in-home estimates response · free estimates
Call (669) 272-2637
Local Service Coverage

Request a Free Estimate in San Jose

Tell us what you need - Bradford Remodeling Co San Jose responds fast. No obligation.

By reaching out through this form, you agree to the terms of our Privacy Policy and authorize us to contact you by telephone, text message, or email about your service request, including from the local pros who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch